[ Home > Technology > Ortronic® Power Multiplier ]
The Ortronic® Active Power Multiplier is designed for working always from the electrical grid, using the wave form of the electrical grid where is connected.
The Active Power Multiplier is huge advance over the previous Ortronic I technology.
The Active Power Multiplier multiplies the useful power of the Power Station by a factor over 1.5. This can be only understood having knowledge about the Ortronic® technology.
The Active Power Multiplier process is divided into two stages: one of them increases the active power of the Power Station and the other stage uses the reactive energy resulting from all the inductive loads to generate electrical energy, and can be synchronized with any generator, including the Power Station.
Improving the quality factor (Q) of the inductive loads, the power multiplication will reach huge values and we will convert these advantages in reality:
1. The electric energy transportation without wires.
2. The water molecule dissociation into hydrogen and oxygen by resonance in alternating current.
3. New conquers in the generation and utilization of the electrical energy.
4. A planet free of contamination.
MODIFICATION OF THE BASIC CALCULATION
The formula to calculate the power is:
But the electricity is not vectorial, so there is not any angle.
The delay between the current and the voltage is a time, not an angle. In fact, to consider it an angle implies the following mistakes:
1. The angle of the ideal load is 90 grades; the cosine of 90 is 0 and the active power is also 0; so that get us to the following conclusion: the ideal motor is the only one that doesn't produce work, and that is absurd.
2. Any angle, between 1 and 89 grades, reduce the active power, what is valid for the knowledge previous to Ortronic® but not for Ortronic® technology, that multiplies the active power with inductive loads.
3. The power factor also can be explained by the relation between the active power and the total power V x I.
But the conclusion is the same: the ideal motor is the only that doesn't produce any work and when pf is zero, the active power is also zero.
4. All said in the previous paragrapghs demonstrates that the cosine of an angle cannot be used as power factor with Ortronic® technology, because it increases the active power of the generator due to the mediation of the inductive loads.
5. Ortronic® technology, with the modification of the basic formula of the next paragraph, is the only that faithfully represents the new dimensions of the electric power.
The advantages of Ortronic® technology demand a new power factor, so the calculation of the power faithfully represents all the variations and possibilities, without incurring in absurd conclusions or results.
The new power factor, that fulfills all what has been said, is the quality factor of the inductive loads, expressed by Q.
In an inductive load, L never can be zero, so that, the quality factor, Q, never can be zero.
When there is no inductive loads, the load is a pure resistor and there is no reactive, then the quality factor Q doesn't exist and the power is: W = V x I.
Q is infinite when R is zero; in that case the load is the ideal, and the ideal motor would be the best possible and would represent the continuous movement. That is acceptable while we don't know where the 'petrol station of the Cosmos' is.
The new formula, valid with the power multiplier of the Ortronic® technology, represents faithfully the physic phenomenon with all the possible values: since the minimum value, represented by V x I with resistor loads, to infinite that would correspond to the ideal inductive load.
The maximum value that can reach in practice will correspond to the maximum quality of the inductive load.
These values which can be reached today allow us to:
Electricity transportation without wires.
To dissociate the water molecule by resonance in alternating current.
ADVANTAGES OF THE ACTIVE POWER MULTIPLIER
1. ELECTRIC TRANSPORTATION WITHOUT WIRES.
As it is known, Nikola Tesla invented the resonant circuit and used it for the electric transmission without wires, with induction coils and air nucleus and crystal capacitors, which he called auto regenerative transformers.
Tesla didn't know the resonance in alternating current without capacitors, maybe because at that time the high speed static switches didn't exist, neither processors with the necessary speed.
With the same principle that Tesla used, plus the resonance in alternating current without capacitors and plus the active power multiplier, the transportation of the electricity without wires will be the electric transport of the future, at low cost and without losses.
2. WATER MOLECULE DISSOCIATION BY RESONANCE.
All the objects have their own resonance frequency and by this process the molecules of the objects are dissociated.
The alternating current has great advantages compared with the variable continuous current to dissociate the objects by resonance, because the forces in each half cycle are in opposite directions, while in variable continuous current the force is always in the same direction.
The true resonance in alternating current, without capacitors, with adjustable power control and at the water dissociation frequency, is only possible to be generated with the active power multiplier and high quality induction coils.
With the adequate induction coil, the resonance without capacitor and the active power multiplier, we can regulate the resonance and the increase of power in each half cycle by the regulation and control of the active power.
Since the necessary power is obtained by feedback, the necessary external energy is very small, that means a drastic reduction of the energy cost.
The hydrogen as fuel, besides reducing the cost, eliminates completely the contamination, because when it is burnt, you obtain water again. For that reason, water like source of fuel is inexhaustible.
PRINCIPAL BENEFICIARIES OF THE ORTRONIC®ACTIVE POWER MULTIPLIER
1. ELECTRIC COMPANIES.
The actual generating power stations will multiply their useful power, saving money in the construction of new power stations.
The electric power stations of the future will be powered by water, dissociated by resonance in hydrogen and oxygen, without contamination, without radioactive residuals, without gas emissions that favor the climatic change and without damaging the environment.
The water as fuel is limitless because it is recyclable without contamination. In fact, the water doesn't get consumend because when the hydrogen is burnt, with the needed oxygen for the combustion, you obtain water again.
2. ELECTRIC TRANSPORTATION COMPANIES.
The actual lines will not transport reactive currents, increasing their capacity of transport.
The transport of the future will be without wires, without losses and without the high cost of the lines. Without making ugly the planet, without damaging any species, animal or vegetable, neither the environment.
3. VEHICLES MANUFACTURERS.
All the heavy vehicles of the future will be powered with hydrogen, separated from the water in the own vehicle or packed in fuel batteries, without contamination, with inexhaustible existences in all the countries and at very low cost.
4. SHIPS MANUFACTURERS.
They will be able to adapt the current fleets so that they can use the water as fuel.
The markets will be enlarged by reducing the costs of the transport drastically.
5. SUBMARINES MANUFACTURERS.
They will not need to refuel neither to evacuate the smoke of the combustion, enlarging without limitation the submerged time.
6. FUEL CELL BATTERIES MANUFACTURERS:
They will be able to store big quantities of energy at very low cost and will transport big quantities of stored energy to any part of the world.
7. ELECTRIC CARS.
The electric cars will have to compete with the hydrogen ones, not being the contamination a decisive argument.
The cheap hydrogen will have an important advantage in price over the batteries.
8. ENGINES FOR TRAINS.
WIll use the water as fuel that will be dissociated by alternating resonance inside the engine.
9. MACHINERY FOR PUBLIC WORKS.
All the big machines will use water as fuel, that will be dissociated in the interior by resonance in alternating current and will be used without storing it.
10. BUSES AND SUBWAYS.
They will adapt the current fleets so that they can use the water as fuel.
The markets will be extended by reducing the costs of the transport drastically.
11. DESALINATION PLANTS BY REVERSE OSMOSIS:
They will be settled in any place, without limitation of power and without the necessity of electric lines.
12. BIG AIR CONDITIONING SYSTEMS.
The drastic reduction of the energy costs will increase the application of the air conditioning and the refrigeration in general.
13. TOWNS IN THE THIRD WORLD.
Towns will have enough energy to stimulate their agriculture, cattle breeding and fishing.
They will be able to transform their agricultural and cattle products, with high quality and competitive prices.
They will stimulate the industry and abandon the underdevelopment.
14. OTHER BENEFICIARIES.
It could be said that all the inhabitants of the planet will be benefitted, in a direct or indirect way. Those namend above, without limited nature, are the ones that we think are necessary to stimulate the industrial development, the production and their appropiate disclosure.
The Ortronic® Active Power Multiplier is designed for working always from the electrical grid, using the wave form of the electrical grid where is connected.
angle.
